FAA Airman Certification Standards Code
UA.V.F — Maintenance and Inspection Procedures
Remote Pilot (small UAS, Part 107) · Area of Operation V: Operations · Standard: FAA-S-ACS-10B
What does ACS code UA.V.F cover?
ACS Code UA.V.F covers "Maintenance and Inspection Procedures" under Area of Operation V (Operations) for the FAA Remote Pilot (small UAS, Part 107) certificate (FAA-S-ACS-10B). Candidates are tested on knowledge elements and risk management factors defined in 14 CFR regulations and FAA handbooks (PHAK / AFH).
Task Specification & Required References
- ACS Document: FAA-S-ACS-10B (Remote Pilot (small UAS, Part 107))
- Area of Operation: Area V — Operations
- Task: Task F — Maintenance and Inspection Procedures
- Primary FAA Sources: Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25), Airplane Flying Handbook (FAA-H-8083-3) / Helicopter Flying Handbook (FAA-H-8083-21), Aviation Weather Handbook (FAA-H-8083-28), 14 CFR Parts 61, 91 & 107, Aeronautical Information Manual (AIM).
Airman Certification Standards Elements
Knowledge Elements
- UA.V.F.K1: Basic maintenance.
- UA.V.F.K2: Preflight inspection.
- UA.V.F.K3: Techniques to mitigate mechanical failures of all elements used in sUAS operations such as the battery and any device(s) used to operate the sUAS.
- UA.V.F.K4: Appropriate record keeping.
- UA.V.F.K5: Persons that may perform maintenance on an sUAS.
- UA.V.F.K6: Preflight inspection for night operations.
- UA.V.F.K7: Manufacturer's Declaration of Compliance for Category 2 and 3 operations.
How do I study UA.V.F?
- Read each element for UA.V.F in FAA-S-ACS-10B and note any you cannot explain in your own words.
- Study each one in the FAA source it points to: the handbook chapter, the 14 CFR section or the AIM paragraph.
- Practice with questions tagged UA.V.F, and read the explanation for every miss.
- Retest, then review the ACS codes you still miss on your practice test report.
New to ACS codes? How the FAA ACS works and how to read your codes →
Aero Academic US