FAA Airman Certification Standards Code
CH.I.G — Operation of Systems
Commercial Pilot Helicopter · Area of Operation I: Preflight Preparation · Standard: FAA-S-ACS-16
What does ACS code CH.I.G cover?
ACS Code CH.I.G covers "Operation of Systems" under Area of Operation I (Preflight Preparation) for the FAA Commercial Pilot Helicopter certificate (FAA-S-ACS-16). Candidates are tested on knowledge elements and risk management factors defined in 14 CFR regulations and FAA handbooks (PHAK / AFH).
Task Specification & Required References
- ACS Document: FAA-S-ACS-16 (Commercial Pilot Helicopter)
- Area of Operation: Area I — Preflight Preparation
- Task: Task G — Operation of Systems
- Primary FAA Sources: Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25), Airplane Flying Handbook (FAA-H-8083-3) / Helicopter Flying Handbook (FAA-H-8083-21), Aviation Weather Handbook (FAA-H-8083-28), 14 CFR Parts 61, 91 & 107, Aeronautical Information Manual (AIM).
Airman Certification Standards Elements
Knowledge Elements
- CH.I.G.K1: Helicopter systems, including:
- CH.I.G.K1a: a. Flight controls, trim, and if installed, stability control
- CH.I.G.K1b: b. Powerplant(s)
- CH.I.G.K1c: c. Main rotor and antitorque systems
- CH.I.G.K1d: d. Transmission and associated drive shafts
- CH.I.G.K1e: e. Fuel, oil, and hydraulic
- CH.I.G.K1f: f. Avionics
- CH.I.G.K1g: g. Landing gear, brakes, steering, skids, or floats, as applicable
- CH.I.G.K1h: h. Electrical
- CH.I.G.K1i: i. Pitot-static, vacuum/pressure, and associated flight instruments
- CH.I.G.K1j: j. Environmental
- CH.I.G.K1k: k. Anti-icing and deicing, including carburetor heat, if applicable
- CH.I.G.K2: Indications of and procedures for managing system abnormalities or failures.
Risk Management Elements
- CH.I.G.R1: Detection of system malfunctions or failures.
- CH.I.G.R2: Management of a system failure.
- CH.I.G.R3: Monitoring and management of automated systems.
How do I study CH.I.G?
- Read each element for CH.I.G in FAA-S-ACS-16 and note any you cannot explain in your own words.
- Study each one in the FAA source it points to: the handbook chapter, the 14 CFR section or the AIM paragraph.
- Practice with questions tagged CH.I.G, and read the explanation for every miss.
- Retest, then review the ACS codes you still miss on your practice test report.
New to ACS codes? How the FAA ACS works and how to read your codes →